Ask one of our Morris specialists and we’ll be happy to find the right product for your needs..
01933 224317
£151.98
£189.81
£168.21
£195.13
£56.55
£21.00
£14.50
£34.38
£36.69
£14.04
£12.88
£14.04
£12.88
£36.69
£36.69
£12.88
Classic vehicles were designed around the lubricant technology, materials and service practices available at the time. Their engines may use different filtration systems, bearing clearances, seals and metallurgy from a modern car. Gearboxes and axles can also require oils without particular modern additive types. Choosing by age alone is not enough, but the original design matters.
Morris classic car oils and lubricants include products developed for heritage applications, including low-detergent or traditional-style engine oils, classic gear oils and specialist workshop fluids. Check the vehicle handbook, marque specialist guidance and the relevant product data before use. Viscosity, detergent level, additive chemistry and compatibility with yellow metals or older seals may all affect the decision.
Barton Petroleum supplies classic lubricants for routine servicing, restoration, running-in and seasonal maintenance. If an engine has been rebuilt, modified or previously run on an unknown product, speak to the engine builder or a lubricant specialist before changing oil type. The aim is to match the vehicle’s mechanical condition and operating use rather than selecting a product simply because it carries a classic label.
01933 224317
Clear answers to common questions about choosing and ordering Morris products.
Many do, because their engine design, filtration, clearances and seal materials can differ from modern vehicles. Use the original specification as a starting point and confirm a suitable current product for the engine’s condition and use.
A monograde is designed around one SAE viscosity grade, while a multigrade is formulated to perform across a wider temperature range. The correct choice depends on the vehicle design, climate and specialist guidance.
Some older gearboxes and axles contain materials or use designs that are sensitive to certain additive systems. Check yellow-metal compatibility and the original performance requirement before selecting a modern gear lubricant.
Follow the engine builder’s running-in procedure and lubricant recommendation. A dedicated running-in oil may be specified for an initial period before changing to the normal service oil.
